Otto Graf GmbH
Plastic Products
Tel. +49 7641 589-0
Fax +49 7641 589-50
Carl-Zeiss-Straße 2-6
DE-79331 Teningen, Germany

Infiltration Tunnel lorry

Perfect accessories for wastewater tanks and wastewater systems

Dimension drawing
Infiltration Tunnel
pdf 755 kb

The Graf Infiltration Tunnel has been mainly designed for the use in private and rural areas. The system, which consists of one or more tunnel modules and two end plates, can be extended as desired. The tunnel is laid in one or more lines of the same level. As the weight of one module is only 11 kg, the handling of the Infiltration Tunnel is excellent. The surface above the tunnels is suitable for vehicle loading, offering varied possibilities for use.

Up to 12,000 litres infiltration volume per pallet

Thanks to its special design, the GRAF Infiltration Tunnel can be stacked easily. Consequently, the shipment of up to 40 Infiltration Tunnels on one pallet saves considerable transport and storage costs.

Vehicle loading

For versatility, the surface above the infiltration tunnels can withstand a continuous load of up to 100 kN/m2 and is therefore also suitable for vehicle loading.

Easy installation

The GRAF Infiltration Tunnels are laid in lines and can be flexibly adapted to specific conditions and to the individual storage volume requested. The installation of the modules is easy, quick and variable. Installation is possible without heavy equipment, as one Infiltration Tunnel weighs just 11 kg. The tunnel modules are simply joined together in a line and two end plates are fitted per line.

300 l

order no.QuantityLength (mm)Width (mm)Height (mm)add to enquiry
Weight (kg)


End plate for infiltration tunnel 300, suitable for vehicle loading

Set 2 units


Inspection end DN 200


Deaeration end DN 100


Graf-Tex geotextile size 2.50 x 2.50 m

for an EcoBloc Inspect flex, Rain Bloc and an infiltration tunnel


Graf-Tex geotextile

Material sold by the metre, roll width 5 m


Enquiry (0)