Light fluid separator Diamant class I

Separator systems for light fluid liquids class I + II
Separators are needed wherever water is contaminated with oils and other light liquids. Separator systems are classified according to NS (nominal size). When you submit an enquiry for a separator system, we calculate the NS you require based on the EN 858 part 2. Operators of the following facilities must ensure that a suitable, functioning separator is installed: Car washes, workshops, fuel stations, vehicle fleets, hazardous goods stores

Coalescence separator and fuel separator
The KLsepa.compact+ separator systems are coalescence separators of class I. They feature an additional coalescence unit that enables a much higher degree of separation. The KLsepa. compact separator systems are fuel separators of class II. A fuel separator achieves a degree of separation of less than 100 mg residual oil per litre of water. With a coalescence unit, this can be reduced to less than 5 mg/l.

NS 6T

calculated size

order no.	NS (l/s)	Length (mm)	Width (mm)	Height (mm)	add to enquiry
108109	6T	2450	1150	1695
Weight (kg)	Volume (l)	Sludge (l)
200	2210	1300

NS 10T

calculated size

order no.	NS (l/s)	Length (mm)	Width (mm)	Height (mm)	add to enquiry
108111	10T	2450	1150	1695
Weight (kg)	Volume (l)	Sludge (l)
200	2210	1300

NS 10T

calculated size

order no.	NS (l/s)	Length (mm)	Width (mm)	Height (mm)	add to enquiry
108113	10T	2450	1400	1950
Weight (kg)	Volume (l)	Sludge (l)
250	3330	2000

NS 15T

calculated size

order no.	NS (l/s)	Length (mm)	Width (mm)	Height (mm)	add to enquiry
108115	15T	2450	1400	1950
Weight (kg)	Volume (l)	Sludge (l)
250	3330	2000