Infiltration Tunnel Twin 600 L
Space-saving and good value. Specifically designed for use in private and rural areas.
Information
- Specially designed for the detention and infiltration of rainwater, for a controlled drainage of rainwater into the groundwater.
- The infiltration tunnel twin is space-saving and cost efficient.In comparison to the infiltration tunnel, it offers on the same building area a double infiltration- or detention volume- 600 litres.
- The infiltration tunnel twin is laid on one level and can be expanded as necessary.
- The installation of the modules is easy and quick.
- The installation can be done without heavy equipment. One infiltration tunnel twin only weights 20 kg.
- The single modules are stacked in line and provided with two end plates.
- In order to facilitate free design of the surface above, the system can be permanently loaded with approx. 3.5 t per m2 and, thus, is suitable for vehicle loading.
Technical details
Scope of supply: without End plate (Accessory Order no. 231004)
| Number | length | width | height |
|---|---|---|---|
| 1 | 1220 mm | 800 mm | 1020 mm |
accessory
End plate for Percolation Tunnel 300, suitable for vehicle loading
[order no. 410098]
Inspection end DN 200
[order no. 340527]
Deaeration end DN 100
[order no. 369017]
Graf-Tex geotextile size 2.50 x 2.50 m
for a Rain Bloc and an Infiltration Tunnel
[order no. 231006]
Graf-Tex geotextile
Material sold by the metre, roll width 5 m
[order no. 231002]
Sedimentation filter shaft suitable for pedestrian loading
[order no. 340026]
Infi ltration fi lter shaft, vehicle loading
[order no. 340025]
Universal Filter 3 external suitable for pedestrian loading
[order no. 340020]
Universal Industrial Filter 3 external suitable for pedestrian loading
[order no. 340050]
Notepad (0)
Downloads
- V32 - Catalogue Stormwater Management
-
-
pdf | 16.86 mb
- Percolation tunnel and Percolation tunnel twin
-
-
pdf | 3.79 mb
- Infiltration Tunnel Twin
-
-
pdf | 992 kb
