Infiltration shaft system DN 600
The final addition to the proven GRAF percolation modules
Information
The GRAF Infiltration shaft system is the final addition to the proven GRAF percolation modules and is perfectly coordinated for use with the Rain bloc and tunnel. The Infiltration shaft system basically comprises an inlet and distributor module of either DN 400 or DN 600 in diameter. The appropriate cover can be selected depending on the load class required (up to class D). Shaft extensions between the two main modules (also above the inlet module with the DN 600 diameter version) ensure a simple connection even for percolation systems with high earth coverings.Technical details
incl. profile seal for telescopic dome shaft; DN 150/DN 200/DN 250/DN 300 connections
To produce greater installation depths, useful length 300 mm
Incl. profile seal for Infiltration connecting piece and/or inlet module; 2 x DN 150 connections; mounting surface for connections of up to DN 150
accessory
Maxi telescopic dome shaft with PP lid, suitable for pedestrian loading
[order no. 371011]
Telescopic dome shaft BEGU Carat
[order no. 371021]
Telescopic dome shaft with cast iron lid, suitable for vehicle loading
[order no. 371020]
Infiltration filter strainer DN 600
Completely made from stainless steel, mesh width 0.50 mm
[order no. 340523]
Infiltration choke drain DN 150
Connection DN150; including overflow DN150; delayed drain of 2,0 up to 13 l/sec
[order no. 330598]
Notepad (0)
Downloads
- V32 - Catalogue Stormwater Management
-
-
pdf | 16.86 mb
- Salesfolder Infiltration shaft system
-
-
pdf | 6.24 mb
- Infiltration distributor module DN600
-
-
pdf | 335 kb
- Infiltration inlet module DN600
-
-
pdf | 210 kb
- Infiltration connecting piece DN600
-
-
pdf | 168 kb
