Optimax-Filter® external suitable for vehicle loading
Optimal cleaning performance with maximum water yield!
Information
- External filter to clean the rainwater before the tank
- Available for pedestrian loading and for vehicle loading
- Provides over 95 % water yield
- Low maintenance as it is self cleaning
- Continuously variable installation depth of 580 mm - 1,050 mm (22.8 - 41.3") using the telescopic dome shaft
- Minimal height offset (200 mm) between the inlet and outlet
- Maximum roof surface area of 350 sqm with connections DN 100 and 750 sqm with DN 150. Optional with cleaning unit Opticlean®
- Very smooth surface and therefore max. self-cleaning, mesh wide 0.35 mm (0.01")
- Optional with cleaning unit Opticlean®
Technical details
connection measurements:
All measurements are from connection centre until the upper edge of the ground.
| inlet | outlet | waste water | ||
|---|---|---|---|---|
| 330 - 800 mm | 530 - 1000 mm | 530 - 1000 mm |
accessory
Reinigungseinheit Opticlean extern
[order no. 340041]
Notepad (0)
Downloads
- R31 - Rainwater harvesting solutions
-
-
pdf | 10.37 mb
- Optimax® filter external
-
-
pdf | 152 kb
- Optimax-Filter® external
-
-
pdf | 90 kb
